Posted on March 18, 2021
One of the most frequent questions I get asked (in these lockdown days via email) is how do you spot meter to get correct exposure? Now I have to say that lots of photographers shy away from spot metering because they just don’t understand how it works in the field. Unfortunately they stick to what seems to work for them and are a little timid when trying something new. But it’s nothing to be apprehensive about and once you ‘get it’ you’ll find your exposures improve 100%. So how does it work?
It’s a very straightforward process. It just needs a little practice to get to the point where it becomes second nature.
Five basics first: 1. Spot metering covers a very small area ( check your manual), 2.Know how your histogram works, 3. Understand how your meter scale works, 4. Know what a ‘stop’ is, 5.Know how to lock your metered exposure. All this is basic but if unsure just check your manual and/or look it up on line.
If you understand these basics then the rest is a piece of cake. So let’s put it all together:
Example 1. Lets say you want to photograph something that’s predominately white. This is what you do: Set your metering to SPOT, focus on your subject where the white is most predominant, adjust the metering scale until the ‘needle’ is in the middle and LOCK it. Now look at the metering scale again, LOAD in +one stop, refocus and take the shot. The whites will be white and everything else in the frame will be correctly exposed.
Example 2. Lets say you want to photograph something that’s predominately black. This is what you do: Set your metering to SPOT, focus on your subject where the black is most predominant, adjust the metering scale until the ‘needle’ is in the middle and LOCK it. Now look at the metering scale again, LOAD in -one stop, refocus and take the shot. The blacks will be black and everything else in the frame will be correctly exposed.
Simple. It all goes back to the idea that if you place one correctly exposed part of the image in the right place on the histogram then everything else in the image will also be correctly exposed.
It might seem a little complicated but it’s not and once you get used to the process it’ll only take a couple of seconds. And your images will be perfectly exposed.
So, remember: ‘SPOT, LOCK & LOAD’.
May the light be with you
Posted on September 15, 2020
Quite recently I was asked whether auto ISO was something I used regularly. And the simple answer is…hardly ever. In fact I really can’t remember the last time I did. So why? Well I guess the the best way I can explain my reasoning is to say that I mainly shoot in Manual Mode.
Because I try to envisage the image that I want before I depress the shutter I dial-in the settings that I need before I take the shot. As photographers we’re all working with a blank canvas and it’s what we want to eventually ‘paint’ that should determine what our settings are…not the other way round. I mean that we should not allow the camera to dictate what the final image will look like. It might be that depth of field is our number one priority or it might be shutter speed etc. but if we rely solely on the camera to make our choices then we relegate ourselves to ‘button pushers’. So let’s suppose I’m shooting in manual mode and I’ve already envisioned the image I want of a bird taking off into the wind. Shutter speed is important because I want to freeze wing movement but, depending on the size of the bird I may not need a very fast speed…especially if it’s a raptor. Depth of field is important if I want front-to-back clarity of the bird, say from wing tip to wing tip. But I’ve already metered for the image I want and the ISO is already determined. So if I need to change any of the variables because of a slight change in light then it’s simply a matter of quickly changing one or more of the settings without taking the my eye from the viewfinder (because I’m totally familiar with the ergonomics of the camera). Therefore, I still maintain the same exposure that I metered for in the first place. If I need to change the shutter speed then I know that I have to change the aperture to maintain the same exposure – equal clicks in opposite directions. If I need the image brightening then I can also change the ISO by equally clicking in the same direction. The exposure will be maintained.
So I saw a presentation given by a fellow photographer who was championing Auto ISO in Manual mode. His reasoning was based on shooting a dappled bird moving in and out of dappled shade. Now you might think that by setting auto ISO any light change is compensated for as the bird moves too and fro. And, sure, it might well do but I have to ask the question, ‘Why would you want to do such a thing?’. This seems crazy to me: either shoot the bird in the light or shoot the bird in the dappled shade…don’t try to do both. To me it’s pointless. I’d rather take a lunch break and wait for the conditions and light that I want because I want total control of the canvas, the brushes and the paints. I’m not saying that you shouldn’t shoot in ‘auto anything’…it’s your choice. But if you choose to shoot in manual then why shoot auto ISO? It doesn’t make sense to me. Take control of everything you can. As photographers we have enough trouble waiting for the light to be as we want it, so why leave ISO in the lap of the gods? Paint the picture you want not what the camera wants.